- Frequency Range: 2 to 26 GHz
- Step Attenuator
- ±1 dB Leveling
- High Resolution
- Pulse Modulation
- Digital Sweeping
- Range: 2 to 26 GHz
- Resolution: 1 kHz (Option 03)
- Accuracy: Same as Time Base
- Time Base (Internal): 10 MHz, < 1x10-9/day (Option 06)
- Time Base Output: Buffered 10 MHz, 1 V RMS into 50 ohms, drived from internal or external time base
- Harmonics, Subharmonics: <-55 dBc
- Max Leveled Output: ≥+5 dBm
- Output Level Accuracy: ±1 dB to 18 GHz; ±2 dB from 18 to 26 GHz
- Attenuation: 99 dB in 1dB steps
- Level Adjustment: -5 dB to +15 dB
- Venier Level Adjustment Range: 20 dBm
- Source Impedance: 50 ohms, nominal
- Output VSWR: ≤ 2:1
- Method: Digitally controlled continuous or step and lock
- Mode: Automatic recycle, single sweep or single step
- Increments: Selectable 1, 10 or 100 MHz
- Sweep Time: 10 rates in 1-2-5 sequence, approx. 1 msec/step to 1 sec/step (unlocked sweep)
- Sweep Trigger Input: TTL low to initiate single sweep or single step
- Repetition Rate: 1 kHz Fixed or Variable (ranges 100 Hz to 5 kHz and 1 kHz to 50 kHz)
- Pulse Width: 1 μsec Fixed or Variable (0.1 to 10 μsec)
- On/Off Ratio: >30dB
- Rise/Fall Times: <25 nsec
- Overshoot, Undershoot and Ringing: ±2 dB, max
- Settling Time: ≤ 100 nsec
- Sync Output: TTL level modulation waveform
- External: TTL level signal, 10 Hz to 1 MHz, 0.1 μsec min width, rising or falling edge triggering
- Remote Interface: IEEE STD 488-1978
- Operating Temperature Range: 0 to 50º C
- Warm-up Time 20 minutes