- Up to 4 Independent Channels (1 standard)
- 10 Standard Functions (sine to 20 Mhz, Square to 25 MHz)
- Up to 50 MS/s Sampling with 12-Bit Vertical Resolution
- Versatile Inter-channel Triggering, Summing and Phase Control
- Frequency Sweep
- Amplitude and Suppressed Carrier Modulation
- Graphical User Interface
- Front Panel Waveform Creation/Editing Tools
- Floppy Disk Drive
- GPIB and RS-232 Interfaces
- Compatible with Waveform DSP2
- SCPI Compatible
- Standard Waveforms: Sine, square, triangle, pseudo-random noise, positive ramp, negative ramp, positive haversine, negative haversine, sin x/x and DC
- Frequency Range
- Sine: 1 mHz to 20 MHz
- Square: 1 mHz to 25 MHz
- Haversines: 1 mHz to 20 MHz
- All Others: (25 pt. waveform) 1 mHz to 2 MHz
- Waveform Quality
- Square Transition Time: For ≤ 10 Vp-p: <9.0 ns; For > 10 Vp-p: <9.5 ns
- Square Aberrations: < 5%
- Sine Distortion: (Elliptic filter selected)
<100 kHz, ≤ 15 Vp-p: No harmonic > -55 dBc
<100 kHz, ≤ 10 Vp-p: No harmonic > -60 dBc
<5 MHz, ≤ 10 Vp-p: No harmonic > -45 dBc
<5 MHz, > 10 Vp-p: No harmonic > -40 dBc
<20 MHz, ≤ 10 Vp-p: No harmonic > -35 dBc
<20 MHz, > 10 Vp-p: No harmonic > -28 dBc
- Arbitrary Waveforms: Max. number of user defined waveforms: 450
- Resolution: Horizontal: 32k points standard (128k/512k points optional), minimum waveform size 5 points; Vertical: 12 bits (4096 points)
- Sampling Frequency
- Range: 0.2 S/s to 50 MS/s
- Resolution: 5 digits or 0.1 mHz
- Clock Output (Each channel) Range: 0.2 Hz to 100 MHz
- Amplitude Range: 0 to 15 Vp-p into 50 ohms; 0 to 30 Vp-p into > 10 kohm
- Offset Range: ±7.5 Vdc into 50 ohm, ±15 Vdc into > 10 kohm
- Filters (user selectable): 20 MHz 4 pole Bessel; 20 Mhz 7 pole, 6 zero Elliptic
- Operation Modes: Continuous; Triggered; Gated; Frequency Sweep; Trigger (Burst) Count
- Sequence Operation
- Number of Waveform Segments (per channel): 2 to 4
- Segment Loop Count: 0 to 1,048,576
- Frequency Sweep
- Sweep Time: 30 ms to 1000 sec (12 frequency points at 30 ms)
- Sweep Modes: Continuous up or down, Continuous up/down, Triggered up or down, Triggered up/down, Triggered Sweep & Hold and Triggered Sweep & Hold with Reverse
- Sweep Spacing: Linear or Log
- Sweep Count: 1 to 1,000,000
- Multichannel Phase Relationships
- Phase Resolution:
- User Waveforms: 360 degrees/Waveform points
- Standard Waveforms: 0.1 degrees
- Front Panel Waveform Creation
- Modes: Freehand, line draw, line list and insert math expressions
- Math Functions: Line, sine, triangle, pulse, tangent, logarithmic, random and block
- Editing Tools: Copy and insert, vertical offset, vertical re-size, delete, mirror and zoom